Hoses

Designed for produced water/fresh water transfer. Typically used for hydraulic fracture used for hydraulic fracture damaged hydrant lines, or to replace a broken water main. Manufactured with NSF standard 61 approved materials for use with potable water.

A more economical alternative to our polyurethane layflat hose. Warflex is reinforced with high–tenacity polyester yarn and coated through the weave with a 70% nitrile rubber / 30% PVC blend for good chemical resistance for produced water. Less abrasion resistance and puncture resistance. Custom hose color and branding available on big volume orders.

The new Midwest Hose Layflat Deployer completes our extensive water transfer portfolio. Our Direct Drive System makes our deployer one of the fastest, most powerful, and easy to use on the market with the capacity to deploy and retreive layflat hose up to 16″ in diameter.

Designed for burner, test, acidizing, cementing, fracking, high pressure jetting, and H2S operations. Used as a flexible connection (instead of pipe) between the riser and manifold or around the ball joint of offshore drillings rigs.

working in extreme heat in the event of an emergency.

Designed for mud delivery, mud jumper, motion compensator, decoking, and water injection operations on a drilling rig. Used as a flexible connection (instead of pipe) between the standpipe and swivel (rotary) or between the pump and standpipe (vibrator) for pumping mud in drilling and exploration work.

Designed for mud delivery, mud jumper, motion compensator, decoking and water injection operations on a drilling rig. Used as a flexible connection (instead of pipe) between the standpipe and swivel (rotary) or between the pump and standpipe (vibrator) for pumping mud in drilling and exploration work. Can handle higher flow rates than Grade D.

Designed for cementing service or acidizing service on a drilling rig. Used as a flexible connection (instead of pipe) to connect the cementing pump manifold and cementing head.

Designed to operate between 2,000 and 3,000 psi for water well, core drill, blast, or shot hole operations on portable drilling rigs, work-over rigs, slim hole and seismograph rigs.

More Information Coming Soon

More Information Coming Soon

More Information Coming Soon

More Information Coming Soon

More Information Coming Soon

More Information Coming Soon

More Information Coming Soon

More Information Coming Soon

More Information Coming Soon

More Information Coming Soon

More Information Coming Soon

More Information Coming Soon

More Information Coming Soon

More Information Coming Soon

More Information Coming Soon

More Information Coming Soon

More Information Coming Soon

More Information Coming Soon

More Information Coming Soon

More Information Coming Soon

More Information Coming Soon

More Information Coming Soon

More Information Coming Soon

Designed to handle diesel, ethanol, gasoline, oil, and petroleum based products that has up to 50% aromatics.

Designed to handle diesel, ethanol, gasoline, oil, and petroleum based products that has up to 50% aromatics. Corrugated construction gives the hose greater flexibility.

Designed to handle diesel, ethanol, gasoline, oil, and petroleum based products that has up to 50% aromatics. Corrugated construction gives the hose greater flexibility.

Designed to handle diesel, ethanol, gasoline, oil, and petroleum based products that has up to 50% aromatics.

Designed to handle diesel, ethanol, gasoline, oil, and petroleum based products that has up to 50% aromatics. Corrugated construction gives the hose greater flexibility.

Designed to handle diesel, ethanol, gasoline, oil, and petroleum based products that has up to 50% aromatics. Corrugated construction gives the hose greater flexibility.

Designed to handle diesel, ethanol, gasoline, oil, and petroleum based products that has up to 50% aromatics. Corrugated construction gives the hose greater flexibility.

Designed for oilfield waste pit recovery service. Ideal for handling crude oil, salt and freshwater, tank bottoms, and drilling mud up to 35% aromatics. Tube is designed to handle diluted solutions of hydrochloric acids and diesel fuels. Corrugated construction makes this hose more flexible.

Designed to handle diesel, ethanol, gasoline, oil, and petroleum based products that has up to 50% aromatics. Corrugated construction makes this hose more flexible.

Designed to handle diesel, ethanol, gasoline, oil, and petroleum based products that has up to 35% aromatics. Ribbed construction makes this hose more flexible than the corrugated design but also less durable.

Designed as an oilfield suction hose used between the slush pump and mud pit to absorb the mud. Has a tank truck hose construction.

Designed to handle diesel, ethanol, gasoline, oil, and petroleum based products that has up to 50% aromatics. Used as a heavy duty suction and discharge dock hose.

Designed to handle diesel, ethanol, gasoline, oil, andpetroleum based products that has up to 50% aromatics. Can also handle salt and fresh water, drilling muds, and mild solutions of hydrochloric acid. Assembled with female frac tank ends crimped with short ferrules designed to maintain maximum flexibility.

Tank Truck Corrugated flexible, more durable, 30 in/HG full vacuum. Tank Truck Ribbed most flexible, easiest to keep straight, 25 in/HG vacuum.

Call 850-698-7192 for more information

Designed as an oilfield suction hose used between the slush pump and mud pit to absorb the mud. Has a tank truck hose construction.

Designed as an oilfield suction hose used between the slush pump and mud pit to absorb the mud. Has a tank truck hose construction.

Hoses have a higher working pressure than normally available chemical hoses. CPE handles a wide variety of acids, alcohols, salt solutions, and petroleum based products.

UHMW handles almost every common industrial chemical used in industry today (98% of chemicals) without staining/contamination.

Lightweight chemical transfer hose designed for almost every common industrial chemical used in industry today (98% of chemicals) without staining / contamination. UHMW handles a wider variety of chemicals than XLPE at virtually the same cost.

Designed for air-operated construction equipment and tank truck service.

Designed for air-operated construction equipment, can handle oil mist from compressors. The standard for heavy duty rock drilling.

Designed to convey hot non-oily air from blower or compressor to storage tank in the transfer of dry bulk materials. Can also be used for transferring mild chemicals at ambient temperatures.

Designed for water, salt water, and mild acids such as water based agriculture fertilizers.

Designed for applications that required the hose to slide easily or require visual confirmation of material flow. Great for pumping water and light chemical solutions. Popular with pumping equipment because it handles suction discharge uses.

Designed to transfer biodiesel and ethanol blends, gasoline, and other petroleum based products under pressure, gravity flow, or medium suction. Handles up to 50% aromatics. Has a static conductive tube and copper static wire.

Lightweight, flexible, rugged suction/discharge hose that has good chemical resistance. Excellent for transferring fertilizer solutions, septic solutions, and pesticides. Hose remains flexible in sub-zero temperatures. Helix serves as a scuff strip.

Economical general service suction and discharge hose used for pumping water and light chemical solutions. PVC helix increases flexibility and abrasion resistance while the smooth interior provides maximum flow.

Designed for discharge use of petroleum based fluids, dilute acids, chemical and abrasive slurries used in oil and gas well stimulation and fracking.

Designed for water discharge in construction, heavy duty equipment rental, and mines and quarries. Soft-wall hose construction provides similar performance to a layflat hose but a higher working pressure and more abrasion resistance.

Designed for dry bulk transfer of bulk cement, grains, animal feed, and other dry abrasive materials. High abrasion resistant tube resists cutting and gouges. Can be rolled for transport and storage.

Designed for dry bulk transfer of bulk cement, grains, animal feed, and other dry abrasive materials. High abrasion resistant tube resists cutting and gouges. Can be rolled for transport and storage.

Mud discharge hose designed for petroleum waste, drilling mud, diesel, and water. The standard to transfer liquid mud at high pressures from the mud pump.

Designed for discharge of potable water or liquids not containing oils or chemicals from a supply ship to an offshore drilling rig or temporary water lines in construction or industrial applications. Tube meets FDA requirements.

Designed to transfer water in inland water ways and offshore high pressure water jetting service. Meets all USCG requirements.

Designed to handle plaster, grout, and concrete at the critical ex areas of a concrete boom truck and high pump concrete boom.

Designed for sand, steel, shot, or other sharp abrasives to handle cleaning, cutting, or finishing stone, glass, or metal surfaces. Static conductive tube prevents the build up of electrical charges.

Non-conductive and MSHA approved hose can handle air, oils, fats, keorsene, gasoline, and petroleum products.

Designed for use with push-on fittings for air tools, petroleum products, gasoline, mild chemicals or water. No clamps or special tools required. Hose reinforcement laid at the most effective angle for maximum strength and coupling holding ability.

Designed for transfer liquid propane gas or butane. Can also transfer natural gas in open, well vented areas at 1 PSI max. UL21 LP Gas/Natural Gas approved. NOT for compressed natural gas.

Designed to transfer fuel oils, diesel, or commercial gasolines. Compatible with bio-diesel fuels up to B20. Smooth cover resists dragging. Static wire included on all sizes.

For gravity of electric pumps dispensing of oils, gasoline, diesel, and petroleum products. Typically used with farm or barrel-type pumps where UL approval is not required. Has static wire, designed for use with electric pumps. NOT for gas station use. Only UL 330 listed hose used for gas station use. NOT for aircraft fueling.

Wire braid steam hose for saturated and superheated steam up to 250 PSI 450° F. Cover is pin pricked to allow venting to eliminate blistering and cover separation. Steel wire braids can be utilized as a static wire to make the hose assembly electrically conductive. NOT for use with detergents. DRAIN AFTER USE!

General purpose hose that can handle air, water, oil, mist, and mild chemical applications.

Designed for portable or production line welding in factories, ships, construction, etc. Meets RMA and CGA (Compressed Gas Association) specifications for Type VD.

Designed to handle oily mists used to lubricate pneumatic tools. Tube is good for air and oil. Suitable for light agriculture spraying such as diluted solutions of herbicides.

Blue PVC, Red EPDM. 3/8″ hose with 1/4″ MPT end (crimped)

Red EPDM, Yellow EPDM. 3/4″ or 1″ hose with crowsfeet (crimped).

Coupled Male x Female with brass Garden Hose Threads. Designed for water transfer and wash down.

Spray lawns, trees, and similar applications with diluted solutions of water and oil based pesticides and herbicides. Can also handle compressed air. Spray hose for fertilizers, herbicides, and insecticides in the agriculture and lawn care industries. Can also handle water and compressed air.

General purpose hoses for open end discharge. Non-absorbing, mildew proof, and rolls up flat for easy storage and handling. Common in construction, agriculture, irrigation, marine, and rental applications. PVC hoses resistant to oils, grease.

Designed to handle edible liquids, vegetable oils, salad dressings, vinegar, mustard and meat products requiring a sanitary hose which will not impair taste. Great for service with hot oil fat filters and fryers.

Designed for food and beverage dispensing, potable water, air breathing lines, packaging and equipment, lube lines, and other visual flow applications.

For suction/discharge use and allows visual flow inspection. Designed for industrial vacuum pumps, food and beverage dispensing, air and water supply, car wash, coolant lines, and deionized water systems. Meets FDA, USDA, and 3A standards.

Clear polyvinyl chloride tubing provides fullview of flowing product. PVC is good to excellent for acids, fair to excellent for alkalies, and excellent for most solvents. NOT for ketones, esters, and some aromatic hydrocarbons. Used for general use, sight gauges on storage tanks, air conditioning drainage, refrigeration drainage, air line, and printing press equipment.

Linear low density polythylene food grade tubing for standard industrial applications such as the transfer of air and liquids, water lines, water softener lines, pneumatic logic control lines, and vending equipment. Excellent resistance to solvents and stress cracking.

Designed for open end discharge applications. Uses include connections to fire hydrants, dust control water trucks, water spraying, and water discharge. Immune to mildew.

Double jacket for rugged environment. Immune to mildew.

Light weight single-jacket hose. High tear strength and oil and grease resistant. Used in fire brigades. Immune to mildew.

Preconnected to pump of an engine (and the booster tank) for putting out small fires near the tank without having to connect to a fire hydrant (brush pumper).

Expansion joints are used to accommodate the movement of pressurized piping systems caused by thermal growth, pressure contraction, machine vibration, seismic disturbances and installation irregularities. The expansion joint will carry numerous types of media including steam, emission gases, water, acids, alkalies, and hydrocarbons.

for brake fluid Designed as a hydraulic brake hose for vehicles and motorcycles. The average life of a brake hose is six years. Brake hoses swell with age and restrict flow. Generally all brake hoses on a vehicle deteriorate at the same rate. All assemblies pressure tested to 3,000 psi.

Compatible with all brake fluids.

Air Brake Tubing, Steel Brake Line Tubing Assemblies, Steel Brake Line Tubing Coils, Rubber Air Brake Hose, Silicone Coolant Hose, Silicone Heater Hose, GPR Radiator Hose, Rubber Heater Hose, Garage Exhaust Hose, Air Conditioning Hose

Camlocks, Petroleum Handling, Industrial and Oilfield Hose Ends, External Swage Hose Ends (Holedale), Crowsfeet Couplings, Sand Blast Couplings, Ground Joint Couplings, Bauer Style Quick Connects, Ringlock Fittings, Storz, Foot Valves and Strainers, Airline Accessories, Industrial Accessories, Clamps, Pressure Washer, Safety and Protection Products

Light weight and flexible for easier handling. Flexibility retained at low, even cryogenic temperatures (below -238° F). Excellent resistance to kinking or crushing. Suction and Discharge use. Up to 100% aromatics, no permeation of gases. All assemblies tested to 1.5 x working pressure. Not for dry material service.

Air conditioning, ambient air movement, dehumidification, heating, sewn construction, and insulated and non-insulated available. Excellent UV compensation with mold and mildew inhibitors for demanding outdoor conditions. Flame resistant in accordance with UL94VTM-O, California Fire Marshal, and NFPA701 Method 2 specifications.

Available in sizes 1/4″-12″. Operates in high/low temperatures. Fire safety up to 1200° F. No permeation of gases. Full vacuum. Annular is hydroformed, a process that enhances flexibility and extends the life of the hose. Suitable for oils, chemicals, gases, exhaust gases, water, steam, vacuum.

Unions conform to NACE, ISO, DNV, and API standards and are interchangeable with other brand name manufacturers adhering to industry standards. Materials conform to ASTM A105N Forged Carbon Steel, AISI 4130, and AISI4140. NPT threads conform to ASME B1.20.1. Figures 206, 207, G, 1002, and 1003 have O-Rings.

Plug Valves, Swivel Joints, J-55 and N-80 Pup Joints, Integral Fittings, Steel Hose Loops, Crossover Adapters and Swages, Blast Joints, Manifolds, Bull Plugs and Caps

Schedule 40 Pipe Fittings, Schedule 80 Pipe Fittings, Merchant Steel Pipe Fittings, XXH Nipples and Schedule 60 Nipples, Forged Steel, Stainless 304/316 Schedule 40, Grooved Nipples, Fittings, and Couplings, Swage Nipples, Oil Country Swage Nipples, Bull Plugs, Oil Country Bull Plugs, Merchant API Couplings, Bolted Sleeve Couplings, ANSI Flanges, API Flanges, Orifice Plates, AWA Plate Flanges, Shedule 40 and Schedule 80 Butt Weld Fittings

Drill Slips, Elevators, Tong Dies, Gate Vales, Shear Relief, Float Valves, Swivel Joints, Specialty Unions, Flow Tees, Stuffing Boxes, Check Valves, Ring Gaskets, Tubing Couplings, Pulsation, Dampener, Bladders, RAM Rubbers, Pip Wipers

Ball Valves, Butterfly Valves, Check Valves, Gate Valves, Needle Valves, Flow Control Valves, Instrument Manifold Valves

Classical Belts, Narrow Belts, Cogged Belts, Kevlar Belts, Banded Belts, Classical Sheaves, Narrow Sheaves, QD Bushings

Unions, Connectors, Elbows, Tees, Stub Tube Connectors, Caps and Plugs

CDS Series, CF Series, CFC Series, PDLC Series, PDSS Series, Bi-Metal Thermometers, Thermowells

ISO-A Series, ISO-B Series, Agricultural Series, Dry Break Series, ISO-16028 Series, Wing Series, Wing 5000 Series, Snap Tite H Series, Extreme Pressure Series, Straight-Through Series, VEP BOP, Wing 5000 BOP, Multi-Coupler Plates and Saturn Block, Industrial Series, Tru-Flate Series, ARO 210 Series, Lincoln Series

37° JIC, Pipe, Pipe Swivel, O-Ring Kits, O-Ring, Split Flange, Face Seal, Hose Barb, Flareless Bite Type, Metric, BSPP, BSPT, Inline Live Swivel, 90° Live Swivels, 90° Dual Plane Live Swivels, Test Points, Thread ID Kits

Inverted Flare, SAE 45° Flare, Compression, Self Aligned, Polyline Flareless, Push-Connect, Push-Connect Air Brake, Compression for DOT, Compression for Air Brake Copper Tubing, Threaded Sleeve, Pipe Fittings, Needle Valves, Drain Cocks, Truck Valves, Ground Plugs, Multiple Shut-Offs, Hose Barbs, Push-On Hose Barbs, Garden Hose Fittings